We are Manufacturer, Supplier, Developer, Service Provider of OMT-DU-LF Self Lubricating Bearings and our setup is situated in Kolhapur, Maharashtra, India.
Self lubricating bearing with stainless steel backing provides high load carrying capacity and very high level of resistance in corrosive environments.
Features : Suitable for dry running, low coefficient of friction, lower
wear, good sliding characteristics, suitable for rotary and oscillating movement. Very high chemical resistance, low absorption of water and swelling. Also performs well with lubrication. Stainless steel backing provides improved corrosion resistance compared with SF-1 and SF-2.
Application : The high level of resistance in corrosion environment provides good application for chemical industry like chemical valve, chemical pump, flow meter, food industry and pharmaceutical industry etc.
|Maximum specific load Static||N/mm2 Psi||250 35500|
|Maximum specific load dynamic||N/mm2 Psi||140 20000|
|Maximum sliding speed||m/s fpm||2.5 500|
|Maximum PxV factor||N/mm2 m/s||1.8|
|Maximum PxV factor (short periods)||N/mm2 m/s||3.6|
|Dry coefficient of friction||µm||0.02 - 0.25|
|Maximum temperature||oC oF||+280oC +536oF|
|Minimum temperature||oC oF||-200oC -328oF|
|Shaft finish Ra (recommended)||µm||0.4 Ra|
|Shaft hardness (recommended)||HB|
|TYPE||Air||Vacuum||Weak Acid||middle Acid||Strong Acid||Alkali|